OXY-KLEAR

Product Name: OXY-KLEAR

Synonym(s): Oxone® Monopersulfate Compound PS-16; Potassium Monopersulfate; Potassium Peroxymonosulfate; No- Chlor

Recommended Uses: Cleaning Agent, Oxidizing Agent

SDS Reference: 85

Company Information:

ALLCHEM PERFORMANCE PRODUCTS, INC.

6010 NW FIRST PLACE

GAINESVILLE, FL 32607

Tel: 352-378-9696

Distributed By:

FOX POOL CORP

3490 BOARD ROAD

YORK PA 17402

24 HOUR EMERGENCY NUMBER: INFOTRAC (TRANSPORTATION): 1-800-535-5053

Classification: CORROSIVE

Signal Word: DANGER

Hazard Statements: HEALTH HAZARDS: Corrosive.

• Skin Corrosion - Causes severe skin burns - Category 1B;

• Serious Eye damage/eye irritation - Causes serious eye damage - Category 1.

• Acute toxicity (oral) - Harmful if swallowed - Category 4.

ENVIRONMENTAL HAZARDS: Harmful to aquatic life with long lasting effects.

HAZARDS NOT OTHERWISE CLASSIFIED (HNOC): Causes digestive tract burns. Causes respiratory tract burns.

Precautionary Statements: Do not get in eye, on skin, or on clothing. Avoid release to the environment. Wear protective gloves / protective clothing / eye protection / face protections. Store locked up. Dispose of contents/container to an approved waste disposal plant.

Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.

Skin Contact: Remove / take off immediately all contaminated clothing. Rinse skin with water / shower. Get medical attention.

Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if not well.

Ingestion: Rinse mouth. Do NOT induce vomiting. Call a Poison Center or doctor immediately.

Pentapotassium bis(peroxymonosulphate) bis(sulphate)

• PERCENT % 86 - 96

• CAS # 70693-62-8

Dipotassium peroxodisulphate

• PERCENT % 0 - 5

• CAS # 7727-21-1

Potassium hydrogen sullphate

• PERCENT % 0 - 5

• CAS # 7646-93-7

Dipotassium disulphate

• PERCENT % 0 - 5

• CAS # 7790-62-7

If In Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. Immediately call a physician.

If on Skin or Clothing: Immediately flush skin with plenty of water for 15 minutes. Remove contaminated clothing. Wash contaminated clothing before reuse. If irritation persists, get medical attention.

If Inhaled: Remove to fresh air. Call a physician immediately.

If Swallowed: Call a physician immediately. Clean mouth with water and drink small amounts of water. If a person vomits when lying on back, place them in the recovery position. Do NOT induce vomiting. Never give anything by mouth to an unconscious person.

Note: Have the product container or label with you when calling a poison control center or doctor, or going for treatment.

Suitable / Unsuitable Extinguishing Media: Water, foam or dry chemical. Do not use high volume water jet or carbon dioxide.

Specific Hazards from Chemical: Toxic or irritating gases/fumes may be given off during burning or thermal decomposition. Water runoff from fire fighting may be corrosive. Cool closed containers exposed to fire with water spray. Fight any surrounding fire with suitable fire-extinguishing agents. Flood small amounts of decomposing products with water (add foaming agent to the water for better penetration). Remove any unaffected product. Control smoke with water spray. This product is an NFPA Class 1 Oxidizer.

Special Protective Equipment: Wear self-contained breathing apparatus and protective suit.

Other Information: Do not allow run-off from the fire fighting to enter drains or water courses.

Personal Precautions: Avoid contact with skin, eyes and clothing. Avoid breathing dust. Wear personal protective equipment. Ensure adequate ventilation, especially in confined areas.

Methods and Materials for cleanup: Remove mechanically with care (e.g. with clean polyethylene plastic shovel). Avoid dust formation. Wash small residues with plenty of water. Do not release into the environment. Do not contaminate water. Do not allow material to contaminate ground water system. If the product contaminates rivers and lakes or drains, inform respective authorities. Never add other substances or waste material to product residue. Offer surplus and non-recyclable solutions to a licensed disposal company.

Handling: For personal protection see EXPOSURE CONTROLS / PERSONAL PROTECTIONS. Product is hygroscopic. Never pour product residue back into storage container. Risk of decomposition. Keep away from combustible materials. Avoid dust formation.

Storage: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat. Do not store over 122 deg F. Avoid impurities (e.g. rust, dust or ash), risk of decomposition. Protect from moisture. Store away from other dangerous and incompatible materials. (NFPA Oxidizer Class 1)

OSHA permissible exposure limit: Dipotassium peroxodisulphate: ACGIH TLV: TWA: 0.1 mg/m3 (as persulfate) - 8 hours.

Appropriate Engineering Controls: Provide adequate ventilation.

Individual Protection Measures: Respiratory Protection: When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.

• Hand Protection: Material - impervious gloves.

• Eye Protection: Wear safety glasses or coverall chemical splash goggles.

• Skin and Body Protection: Where there is potential for skin contact, have available and wear as appropriate, impervious gloves, apron, pants, jacket, hood and boots. Remove and wash contaminated clothing before re-use.

• Protective Measures: When using, do not eat or drink. Do not breathe dust.

• Appearance: White Solid Granules

• Odor: None

• Odor Threshold: No data available

• pH: 2.1

• Melting Point/Freezing Point: >50°C (>122°F)

• Initial Boiling Point/Boiling Range: Not Applicable

• Flash Point: Not Applicable

• Evaporation Rate: No data available

• Flammability (solid/gas): solid / gaseous. Does not ignite

• Upper/lower Flammability or Exposure limits: No data available

• Vapor Pressure: No data available

• Vapor Density: No data available

• Density: 2.35 g/cm3

• Solubility(ies): 297 - 357 g/l

• Partition Coefficient: n-octanol/water: No data available

• Auto-ignition Temperature: Not auto-flammable

• Decomposition Temperature: >50°C (122°F)

• Viscosity: No data available

Stability/Reactivity: Stable under recommended storage conditions.

Possibilities of Hazardous Reactions: Even small amounts of moisture or impurities can noticeably reduce the self-accelerating decomposition temperature (SADT).

Conditions to Avoid: Keep away from heat and sources of ignition. Protect from moisture.

Incompatible Materials: Accelerators, strong acids, and bases, heavy metals and heavy metal salts, reducing agent. Avoid impurities (e.gg rust, dust ash), risk of decomposition.

Hazardous Decomposition Materials: Oxygen / Sulphur dioxide / sulphur trioxide

Reproductive Toxicity: No data available.

Carcinogenicity: No classified as carcinogenic.

Mutagenicity: Genotoxicity in virto: Ames test: negative

Avian Toxicity: No data available.

Environmental Hazards: No data available.

Disposal: Dispose of in accordance with local, state and federal regulations.

TSCA: USA: Reported in the EPA TSCA Inventory.

SARA (311, 312): Acute Health Hazard.

SARA 313: Not applicable.

Right To Know Hazardous Substance List:

• California Prop 65 - Not listed.

• New Jersey - Potassium hydrogen sulphate is listed on NJ Workplace Hazardous Substance list present at a concentration of 1% or more (0.1% for substances identified as carcinogens, mutagens or teratogens)

Waste Classification: No data available.

Workplace Classification: This product is considered hazardous under the OSHA Hazard Communication Standard (29CFR 1910.1200).

CERCLA Reportable Quantity:Not applicable.

ALWAYS COMPLY WITH ALL APPLICABLE INTERNATIONAL, FEDERAL, STATE AND LOCAL REGULATIONS REGARDING THE TRANSPORTATION, STORAGE USE AND DISPOSAL OF THIS CHEMICAL. Due to the changing nature of regulatory requirements, the REGULATORY INFORMATION listed should NOT be considered all-inclusive or authoritative. International, Federal, State and Local regulations should be consulted to determine compliance with all required reporting requirements. The information in this SDS was obtained from sources, which we believe are reliable. HOWEVER, THE INFORMATION IS PROVIDED WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED, REGARDING ITS CORRECTNESS. The conditions or methods of handling, storage, use, and disposal of the product are beyond our control and may be beyond our knowledge. FOR THIS AND OTHER REASONS, WE DO NOT ASSUME RESPONSIBILITY AND EXPRESSLY DISCLAIM LIABILITY FOR LOSS, DAMAGE OR EXPENSE ARISING OUT OF OR IN ANY WAY CONNECTED WITH THE HANDLING, STORAGE, USE OR DISPOSAL OF THE PRODUCT. This SDS was prepared and is to be used only for this product. If the product is used as a component in another product, this SDS information may not be applicable.

HMIS Rating:

• Health: 3

• Flammability: 0

• Reactivity: 1

NFPA Rating:

• Health: 3

• Flammability: 0

• Reactivity: 1

Special Hazard Warning: No data available