Vinyl Cover Cleaner

Supplier:

Phoenix Product Company 

55 Container Drive 

Terryville, CT 06786 

(860) 589-7502 

U.S. PERS Emergency Telephone 1-800-633-8253 

Chemical or Common Name: Alkyl Phenol Ethoxylate 

 CAS #: 497-19-8 

Comments: Any components that are listed above are hazardous as defined in 29 CFR 1910.1200. 

Eyes: May cause irritation to the eyes and prolong exposure may result in damage to the eye. 

Skin: May cause skin irritation. May cause a more severe response if the skin is abraded (i.e. cut or scratched). 

Inhalation: Vapor or mist may cause mild respiratory irritation. Prolonged or repeated exposure may irritate the upper respiratory tract. 

Ingestion: May be harmful if swallowed. May cause vomiting, nausea, and diarrhea. May cause irritation to the mouth, throat, and stomach. If product is ingested, CONSULT A PHYSICIAN IMMEDIATELY. 

Comment{s}: Unnecessary exposure to any chemical is to be avoided. This product, as with any chemical, may enhance allergic conditions on certain people. There are no known, medical conditions aggravated by exposure to this product.

Carcinogens: None known. 

Mutagens: None known. 

Reproductive Toxins: None known. 

Sensitizers: None known. 

Eyes: Immediately upon exposure to the eyes, they should be flushed with plenty of fresh water, ensuring that under both the upper and lower lids are rinsed well for five to ten minutes. GET MEDICAL ATTENTION if irritation persists. 

Skin: Exposed skin should be thoroughly rinsed with fresh water to move the product from the exposed area as soon as possible. If irritation persists, CONSULT A PHYSICIAN. 

Inhalation: In aerosol form it could result in respiratory irritation. Move injured person into fresh air. Keep person calm and under observation. If breathing difficulties or irritation persists, CONSULT A PHYSICIAN. 

Ingestion: Data regarding the effects of ingestion is not available. If product is ingested, CONSULT A PHYSICIAN. 

Comment{s}: Although this product is considered to be a safe product, the user assumes the liability to ensure that safe and prudent procedures are used in handling and using the product in order to ensure that personnel are not dangerously exposing the eyes and skin without proper safeguards. 

Flash Point: Above 200˚F 

{Method}: P.M.C.C. 

Auto Ignition Temperature: Not determined. 

Flammability Limits In Air: Not determined. 

Extinguishing Media: All standard firefighting media. 

Hazardous Decomposition Products: This product contains a polydimethylsiloxane which can generate formaldehyde at approximately 300F (150C) and above in atmospheres containing oxygen. Other decomposition products are carbon oxides, sulfur oxides, nitrogen oxides, and silica (crystalline). 

Containment/Clean-Up: Disposal of collected product, residues, and clean-up materials may be governmentally regulated. Observe all applicable local, state, and federal waste management regulations. Mop up, wipe up, or soak up with absorbent and contain for salvage or disposal. For large spills, provide diking or other appropriate containment to keep material from spreading. Clean any remaining slippery surfaces by appropriate techniques, such as several moppings or swabbings with appropriate solvents; washing with mild, caustic detergents or solutions; or high-pressure steam for large areas. For non-silicones, use typical industrial cleaning materials. Observe any safety precautions applicable to the cleaning material being used. Observe all personal protection equipment recommendations described in the physical and chemical properties. Local, state, and federal reporting requirements may apply to spills or releases of this material into the environment. See applicable regulatory compliance information in the Regulatory Information section on this page.

Note: See the physical and chemical properties tab for Personal Protection Equipment for Spills. 

Handling: Keep container closed when not in use. Avoid direct or prolonged contact with skin and eyes. Avoid breathing vapors and mists. 

Storage: Store in tightly closed containers. Store in a dry, well-ventilated area, away from incompatible materials, see Section X. Protect container from damage. 

Engineering Controls: 

• Local Exhaust: None should be needed. 

• General Ventilation: Recommended. 

Personal Protective Equipment For Routine Handling: 

• Eyes: Use proper protection {safety glasses as a minimum}. 

• Skin: Washing at mealtime and end of shift is adequate. 

• Suitable Gloves: No special protection needed. 

• Inhalation: No respiratory protection should be needed. 

• Suitable Respirator: None should be needed. 

Personal Protective Equipment For Spills: 

• Eyes: Use proper protection {safety glasses as a minimum}. 

• Skin: Washing at mealtime and end of shift is adequate. 

• Inhalation/Suitable Respirator: No respirator protection should be needed. 

• Precautionary Measures: Avoid eye contact. Use reasonable care. 

• Comments: None. 

Note: These precautions are for room temperature handling. Use at elevated temperatures, or in aerosol/spray applications, may require added precautions. 

Physical Appearance: Milky White Liquid 

Odor: Mild Odor 

Specific Gravity @ 25˚C: 1.01 

Viscosity: 7,000 cps 

Solubility In Water: Dispersible 

Volatile Content: Water {40%} 

pH: 6.0 

Note: The above information is not intended for use in preparing product specifications. Contact manufacturer before writing specifications. 

Chemical Stability: Stable. However, avoid temperature extremes (above 1770C / 3500F), the onset of polymer decomposition. Thermal decomposition is dependent on time and temperature. 

Hazardous Polymerization: Hazardous polymerization will not occur. 

Conditions To Avoid: None known. 

Materials To Avoid: Oxidizing material can cause a reaction. 

Comments: None. 

Product does not contain any substances at levels considered by OSHA, NTP, IARC or ACGIH to be human carcinogens. Complete information is not yet available. 

Complete information is not yet available. 

Disposal Method: Recovery and reuse, rather than disposal, should be the ultimate goal of handling efforts. The material resulting from clean-up operations may be a hazardous waste and therefore, subject to specific regulations. Chemical additions, processing or other alterations of this material may make the waste management information presented in this MSDS incomplete, inaccurate or otherwise inappropriate. This product, due to these alterations, may be classified as a RCRA Hazardous waste in accordance with 40 CFR 261. According to RCRA, it is the responsibility of the waste generator to ensure proper disposal. Be advised that state and local requirements for waste disposal may be more restrictive or otherwise different from federal laws and regulations. Consult state and local regulations regarding the proper disposal of this material. 

O.S.H.A. Status: Contents of this MSDS comply with the O.S.H.A. Hazard Communication Standard 29 CFR 1910.1200. 

T.S.C.A. Status: All chemical substances found in this product comply with the Toxic Substances Control Act inventory reporting requirements. 

D.S.L. (Canada): All chemical substances found in this product are listed. 

E.P.A. SARA Title III Chemical Listing: 

• Section 302 Extremely Hazardous Substances: None 

• Section 304 C.E.R.C.L.A. Hazardous Substances: RQ (None) 

Section 312 Hazard Class: 

• Acute: No 

• Chronic: No 

• Fire: No 

• Pressure: No 

• Reactive: No 

Section 313 Toxic Chemicals: None present or none present in regulated quantities. 

No representations or warranties, either expressed or implied, of merchant ability, fitness for a particular purpose or any other nature are made hereunder with respect to information or the product to which information refers.